Robotic Technology (GD) Co., Ltd. is a China-based CNC robot manufacturer offering six robot models for automated loading and unloading applications. With rated payloads from 5 kg to 30 kg and arm spans from 883 mm to 2,131 mm, these robots can be integrated into CNC machine tending workcells for operations such as loading raw workpieces, unloading machined parts, transferring components between machines, and turning workpieces between machining stages.

Model selection depends on the workpiece handling requirements, robot reach, machine layout, end-of-arm tooling, and the required workcell configuration. The rated payload should be evaluated together with the weight of the gripper and other end-of-arm tooling; it should not be treated directly as the maximum workpiece weight.

 
  • CNC Loading Robot
    Model: BRTIRUS0707A
    Repeatability: ±0.03 mm
    Loading Ability: 7 kg
    Arm Length: 883 mm
  • CNC Robot Arm
    Model: BRTIRUS1820A
    Repeatability: ±0.05 mm
    Loading Ability: 20 kg
    Arm Length: 1895 mm
  • CNC Machine Tending Robot
    Model: BRTIRUS2030A
    Repeatability: ±0.08 mm
    Loading Ability: 30 kg
    Arm Length: 2068 mm
  • Machine Tending Robot
    Model: BRTIRUS1510A
    Repeatability: ±0.05 mm
    Loading Ability: 10 kg
    Arm Length: 1587 mm
  • CNC Tending Robot
    Model: BRTIRUS0805A
    Repeatability: ±0.05 mm
    Loading Ability: 5 kg
    Arm Length: 990 mm
  • Loading and Unloading Robot
    Model: BRTIRUS2110A
    Repeatability: ±0.05 mm
    Loading Ability: 10 kg
    Arm Length: 2131 mm
 

1. CNC Machine Loading and Unloading Applications

CNC machine tending robots are used to automate material handling around CNC lathes and machining centers. Depending on the workcell design, a robot can pick up a raw workpiece, load it into a machine chuck or fixture, remove the machined part, and transfer it to a designated unloading position.

For applications involving more than one machine, a robot can also transfer workpieces between machining stations. One documented project uses a single robot to serve two CNC lathes, with a customized pallet feeding arrangement. The robot loads and unloads the machines according to their machining cycles.

The required robot model and peripheral equipment depend on the workpiece, machine access, loading method, and production layout.

2. CNC Robot Models and Technical Specifications

The following models are available for CNC robot applications. Compare rated payload, arm span, and repeatability against the actual workpiece-handling task and machine layout.

Robot Model Rated Payload Arm Span Repeatability
BRTIRUS0707A 7 kg 883 mm ±0.03 mm
BRTIRUS1820A 20 kg 1,895 mm ±0.05 mm
BRTIRUS2030A 30 kg 2,068 mm ±0.08 mm
BRTIRUS1510A 10 kg 1,587 mm ±0.05 mm
BRTIRUS0805A 5 kg 990 mm ±0.05 mm
BRTIRUS2110A 10 kg 2,131 mm ±0.05 mm

Additional listed specifications:

Robot Model Power Capacity Robot Weight Protection Rating
BRTIRUS0707A 2.93 kVA 55 kg IP40
BRTIRUS1820A 5.87 kVA Approx. 230 kg IP40
BRTIRUS2030A 6.11 kVA 310 kg IP40
BRTIRUS1510A 5.06 kVA 152 kg IP54
BRTIRUS0805A 3.67 kVA Approx. 53 kg IP40
BRTIRUS2110A 6.48 kVA Approx. 230 kg IP40

The listed power supply for these models is 220 V. Power capacity is expressed in kVA and should not be interpreted as motor output power.

When comparing models, buyers should consider the complete handling load, including the gripper and related tooling, as well as the required reach, mounting position, machine access, and movement path. Maximum workpiece weight and usable working envelope should be confirmed against the proposed application before model selection.

3. CNC Machine Compatibility and Workcell Configuration

The robots can be integrated into CNC machine tending applications involving CNC lathes and machining centers. The actual connection and workcell arrangement depend on the machine model, available access space, loading and unloading positions, and control requirements.

A CNC tending workcell may include:

End-of-arm tooling: Customized grippers, anti-slip grippers, dual-station pneumatic grippers, or vacuum gripping arrangements, according to the workpiece and handling method.

Workpiece feeding and positioning: Customized pallet feeding systems, positioning pallets, vibratory feeders, positioning tables, or conveyors.

Control and communication: PLC-based coordination and I/O communication. Supported communication interfaces include Ethernet, Modbus TCP, and RS485.

Additional integration: 2D or 3D vision integration, sensors, safety fences, and light curtains, where required by the project.

These are application-dependent configuration options, not standard equipment included with every robot. The required gripper, feeding system, positioning equipment, communication method, and safety devices should be defined according to the machine and production process.

Specific CNC machine brand and model compatibility should be checked during project evaluation. No universal compatibility list is specified here.

4. Automated Workflows and Customized CNC Automation

A typical CNC machine tending workflow includes raw workpiece pickup, machine loading, machining, finished-part unloading, and transfer to the next position. For multi-machine applications, the robot can move parts between machines and coordinate handling actions with the machining sequence.

In a documented cylindrical pin application in Vietnam, a robot with a dual-station pneumatic gripper and positioning pallets served two CNC lathes. After the first machining operation, the robot removed the workpiece, turned it, and loaded it into the second lathe for the next operation. I/O communication between the machines supported coordinated operation.

The workcell can be configured with different grippers, feeding arrangements, positioning devices, PLC coordination, and vision integration according to the application. These configuration details need to be confirmed during project design rather than assumed to be included in every standard robot package.

The robot performs the programmed handling and transfer operations, while the CNC machines carry out machining. Operators may still be required to replenish raw materials, perform routine maintenance, and respond to faults. The degree of automation depends on the final workcell configuration and operating requirements.

5. CNC Robot Manufacturing and Automation Project Support

As a CNC robot manufacturer in China, Robotic Technology (GD) Co., Ltd. has more than 10 years of experience in the automation industry and operates a 12,000 m² manufacturing base. The company reports project experience in more than 40 countries and over 1,000 automation projects.

Its engineering work covers mechanical design, electrical control, robot programming, gripper design, control cabinets, electrical drawings, PLC integration, vision integration, commissioning, and project verification.

For automation projects, Factory Acceptance Testing (FAT) can cover agreed items such as robot movement, I/O coordination, work cycles, cycle time, and fault response. On-site installation, commissioning, Site Acceptance Testing (SAT), operator training, and remote technical support can be arranged according to the project scope and agreement.

Standard robot delivery depends on the selected model and stock availability. Customized automation projects generally require 30–60 days, depending on project scope and complexity. The stated warranty period for robot products is 12 months. Overseas spare parts can be shipped from China, while on-site service arrangements depend on the project agreement.

6. Request a CNC Robot Quotation

To evaluate a CNC robot supplier for your machine tending application, or to discuss a customized loading and unloading workcell, please provide the following information:

  • CNC machine type, brand, and model
  • Workpiece dimensions and weight
  • Required loading, unloading, and transfer operations
  • Machine quantity and workcell layout
  • Preferred robot model, if already selected
  • Photos, drawings, or layout information
  • Estimated project quantity

If the machine and workpiece details are not yet finalized, initial photos and estimated quantities can be provided for a preliminary discussion. The robot model, gripper, feeding arrangement, machine interface, and project scope can then be evaluated against the actual application.

Robotic Technology (GD) Co., Ltd. is one of the most experienced cnc robot manufacturers and suppliers in China, also supports custom service and one year warranty. Please feel free to wholesale CE approved cnc robot for sale here from our factory. Contact us for quotation.

Cnc Machine Tending Robot, Cnc Robot Arm, Loading And Unloading Robot
Send Inquiry
Send Inquiry