The BRTIRUS1510A is a six-axis industrial welding robot with a maximum payload of 10 kg, an arm span of 1,587 mm and repeat positioning accuracy of ±0.05 mm. It can be used as the robot unit in a robotic welding system or integrated into a configured welding workstation.
Documented applications include MIG welding of 3 mm carbon steel components and TIG welding of stainless steel tubes, profiles and sheet-metal parts. The welding process, power source, torch, workpiece positioning equipment and other workstation components should be selected according to the actual workpiece and production requirements.
-
6-axis Welding RobotModel: BRTIRUS1510A Six-Axis Robot
Repeatability: ±0.05 mm
Loading Ability: 10 kg
Arm Length: 1587 mm
Customization: Robot welding workstations can be tailored to your... -
Welding Industrial RobotModel: BRTIRWD1506A Six-Axis Robot
Repeatability: ±0.05 mm
Loading Ability: 6 kg
Arm Length: 1647 mm
Weldable Materials: Carbon Steel, Stainless Steel, Aluminum... -
Robotic Arm for WeldingModel: BRTIRUS2110A Six-Axis Robot
Repeatability: ±0.05 mm
Loading Ability: 10 kg
Arm Length: 2131mm
MOQ: 1 unit -
Automatic Welding RobotModel: BRTIRUS1820A Six-Axis Robot
Repeatability: ±0.05 mm
Loading Ability: 20 kg
Arm Length: 1895 mm
1-unit MOQ — start with a single system and scale into bulk orders and...
1. Welding Applications and Production Examples
MIG Welding of Carbon Steel Components
In a documented project in India, four BRTIRUS1510A robots were integrated into a robotic MIG welding workstation for 3 mm carbon steel workpieces. Each workpiece had four short weld seams, with an approximate production time of 30 seconds per workpiece under the project setup.
The workstation included:
- Four BRTIRUS1510A six-axis robots
- 350MR MIG welding systems
- A dual-station positioner
- Two sets of customized fixtures
- An automatic torch cleaning station
- PLC control
The dual-station layout allows the robots to weld at one station while an operator loads or unloads workpieces at the other. The positioner rotates 180° to exchange the two stations.
The reported cycle time applies to this specific project configuration and workpiece. It should not be treated as a guaranteed cycle time for other welding applications.
TIG Welding of Stainless Steel Components
A documented TIG welding application uses four six-axis robots to weld stainless steel storage racks, crossbeams and structural components. The workpieces include 201 and 304 stainless steel round tubes, square tubes and sheet-metal parts.
The workstation uses programmed welding paths and argon shielding gas. Actual torch, welding power source, fixture and positioning requirements depend on the workpiece geometry and welding procedure.
Electrical Cabinet Frame Welding
The BRTIRUS1510A has also been used in an electrical cabinet frame welding application with a customized dual-axis positioner. The positioner rotates the workpiece to provide access to different welding angles after clamping.
The positioner and fixture are project-specific workstation components rather than standard features of the robot itself.
2. Technical Specifications
The following specifications are for the BRTIRUS1510A robot.
| Parameter | Specification |
|---|---|
| Model | BRTIRUS1510A |
| Robot Type | Six-axis industrial robot |
| Maximum Payload | 10 kg |
| Arm Span | 1,587 mm |
| Repeat Positioning Accuracy | ±0.05 mm |
| Robot Weight | 152 kg |
| Power Capacity | 5.06 kVA |
| Control System | HC |
| Power Supply | 220 V |
Joint Motion Range and Maximum Speed
| Joint | Motion Range | Maximum Speed |
|---|---|---|
| J1 | ±165° | 190°/s |
| J2 | -95° to +70° | 173°/s |
| J3 | -85° to +75° | 223°/s |
| J4 | ±180° | 254°/s |
| J5 | ±115° | 270°/s |
| J6 | ±360° | 342°/s |
The 10 kg maximum payload is a robot specification, not a stated welding torch capacity. The complete end-of-arm configuration and its load requirements should be checked during application evaluation.
3. Welding Processes and Workstation Configuration
The product information lists arc-welding and resistance spot-welding configurations. Its process information also identifies CO₂, MIG/MAG and TIG welding applications.
The appropriate process and equipment configuration must be confirmed for the specific project. Welding power sources, torches, wire-feeding equipment, shielding-gas arrangements and related accessories are selected according to the welding process and workpiece requirements.
Programmable welding parameters listed for the system include:
- Welding current
- Welding voltage
- Welding travel speed
- Shielding gas flow
Depending on the project, the robotic welding workstation can be configured with components such as:
- Welding power sources and torches
- Customized workpiece fixtures
- Single-station or dual-station positioners
- Automatic torch cleaning equipment
- PLC control systems
- Conveyors and workpiece transfer equipment
- Sensors and vision systems
- Safety protection equipment
These are project-level configuration options, not all standard components supplied with the standalone BRTIRUS1510A robot. The final supply scope should be specified in the technical proposal.
4. Automated Welding Workflow
A robotic welding workstation is programmed according to the workpiece geometry, weld locations and required production sequence.
For a dual-station arrangement, the workflow can be organized as follows:
- The operator loads and positions workpieces in one station.
- The robot welds the workpiece at the other station according to the programmed path.
- After the welding cycle, the positioner rotates 180° to exchange the two stations.
- The operator unloads the completed workpiece and loads the next one while the robot starts welding at the available station.
The actual sequence, operator tasks, robot movements and cycle time depend on the fixture layout, positioner design, welding procedure and production requirements.
5. Manufacturing and System Integration
Robotic Technology (GD) Co., Ltd. is a China-based welding robot supplier offering robot products and project-based automation integration. Its engineering scope includes mechanical design, fixture development, electrical control, PLC programming, robot programming and system integration.
For a custom robotic welding workstation, the integration scope can include robot units, fixtures, positioners, conveyors, sensors, PLC control, vision systems and safety protection. PLC and communication configurations are selected according to project requirements.
Before shipment, factory acceptance testing can cover robot movements, I/O coordination, work cycles, cycle time and fault response, as defined in the project agreement.
For projects requiring on-site support, the service scope can include installation, commissioning, site acceptance testing and operator training. The actual work scope is confirmed according to the equipment supplied and the project arrangement.
6. Technical Support and Supply
The minimum order quantity for the robot product is 1 unit. The stated warranty period for robot products is 12 months.
Technical support includes remote troubleshooting and technical assistance. Spare parts can be shipped from China. Installation, commissioning and training arrangements are project-dependent and should be confirmed in the quotation.
Customized automation projects typically require 30–60 days, depending on project scope and complexity. This is a project-level reference, not a fixed delivery period for a standalone robot. Shipping arrangements for standard robot products depend on stock availability.
7. Request a Welding Robot Quotation
To evaluate a BRTIRUS1510A six-axis welding robot or a complete robotic welding workstation, please provide the following information:
- Workpiece drawings, photos or samples
- Workpiece material, dimensions and weight
- Welding process, such as MIG/MAG or TIG
- Weld locations, seam lengths and welding positions
- Required production volume or target cycle time
- Whether you need a standalone robot or an integrated welding workstation
- Any requirements for fixtures, positioners, conveyors or other auxiliary equipment
Based on the workpiece and production information, Robotic Technology (GD) Co., Ltd. can evaluate the robot application and propose a suitable robot and workstation configuration.
Robotic Technology (GD) Co., Ltd. is one of the most experienced welding robot manufacturers and suppliers in China, also supports custom service and one year warranty. Please feel free to wholesale CE approved welding robot for sale here from our factory. Contact us for quotation.
6 axis Welding Robot, Robotic Arm For Welding, welding robot